Infinity Pool 2026

A complete pool renovation in Singapore involves draining the pool, removing all existing tiles, inspecting and repairing the pool shell, applying a new waterproofing membrane, flood testing the membrane, retiling with new tiles and grout, and refilling with rebalanced water. The process takes 2 to 4 weeks for a standard residential pool and costs SGD […]

 Pool leak repair targets a specific, identifiable source of water loss such as a cracked fitting, a failed pipe joint, or a hairline crack in the shell. Pool waterproofing replaces the protective membrane beneath the pool tiles to stop water migrating through the pool structure broadly. Leak repair fixes a defined fault. Waterproofing addresses the

 A salt chlorination system is a pool sanitation method that uses electrolysis to convert dissolved salt in the pool water into chlorine. The system consists of a salt cell installed inline with the pool’s return plumbing and a controller unit that regulates chlorine output. As water passes through the cell, an electrical current splits the

Swimming pool regrouting is the process of removing deteriorated grout from the joints between pool tiles and replacing it with fresh, waterproof grout. Grout degrades over time from pool chemicals, UV exposure, and thermal cycling. When it fails, water infiltrates behind the tiles, weakens the adhesive bond, and begins to damage the waterproofing layer beneath.

During Singapore’s rainy season, pool water chemistry needs more frequent monitoring because heavy rain dilutes chlorine, drops pH, and introduces algae spores. After every significant storm, test free chlorine and pH immediately, shock dose if chlorine has dropped below 1.0 ppm, and run the pump continuously for 24 hours. Pools should also be inspected for

Swimming pool leak detection in Singapore follows a structured sequence: first confirm water loss is real using a bucket test, then isolate whether the leak is in the pool structure or plumbing using systematic inspection and dye testing, then use pressure testing for underground pipe faults and acoustic detection for precise location. Each step narrows

Pool pressure testing in Singapore involves isolating each plumbing line connected to the pool, sealing the pipe ends, and introducing pressurised air or water into the line. A gauge monitors the pressure over a set period. If pressure drops, the pipe or fitting in that line has a leak. This method identifies underground pipe faults

Professional pool tile repair in Singapore begins with draining the pool and identifying the root cause of the damage before any tile is touched. A proper repair assesses whether the failure is at the grout level, the adhesive level, or the waterproofing membrane beneath. The damaged tile is then removed, the substrate is prepared, any

If you’ve started noticing damp patches around your pool deck, unusual cracks along the walls, or a steady drop in water level that you can’t explain, there’s a good chance your pool needs waterproofing attention. It’s one of those jobs that homeowners in Singapore often delay usually because they’re unsure what it involves or how

Pool regrouting removes and replaces deteriorated grout between tiles while keeping the existing tiles in place. Pool retiling removes all existing tiles and installs new ones, typically alongside waterproofing work. Regrouting is the right choice when tiles are solid and only the grout has failed. Retiling is needed when tiles are hollow, debonded, cracked, or